A&G - Mag Spacer - Glock 19/23 to 26/27 - Grip Extender

    Price $11.50    
Item # 100006
Spec

Library sidebar
 
 
      A&G Grip Extenders are collars made of high-impact polymer which slip over full-size magazines, whether they are single stack 10 round or double stacked high capacity. These mini-guns (Glock 26/27, Glock 29/30, Para-Ordnance P10, Colt Officer’s Model and other small frame 1911 design 45’s) already accept the larger magazines. (In the case of the Glock 19/23 or 17/22 mags, the sleeves only fit on the full metal lined magazines). The A&G Extender is held in place with a set screw.

A large segment of mini-gun owners are law enforcement. If concealability is essential, the gun can be carried with a standard magazine, keeping a full size magazine with an A&G Grip Extender as a backup.

The Grip Extender can be put on and taken off the magazine very easily, converting your large magazine back to your duty weapon in under a minute.

A&G Grip Extenders help center the magazine in the frame of the gun. This helps to eliminate pinching and increases comfort and accuracy.

The A&G Grip Extender fills the gap between the bottom of the gun and the base of your full size magazine, giving the shooter the grip and feel of its larger counterpart.

A&G Grip Extenders come packaged individually with an Allen key and instruction sheet included.
 
 
Installation Instructions
  Safety First!!  
  Make sure gun and magazine are unloaded before proceeding with instructions below.
   
Home
 
   
 
  Caution: When loading any magazine, be sure  the safety is on. When ejecting a magazine,         DO NOT rely on gravity, pull magazine clear of gun with thumb and forefinger of weak hand.
  1 - Place extender over magazine and, holding with one hand, push down with other hand.
  2 - Slide extender to bottom of magazine and snug up set screw with Allen wrench supplied.
  3 - Place unloaded magazine into empty gun and move Extender up so it fits closely against the gun. Do not over-tighten ( may damage magazine).
  4 - Check to see that magazine seats properly in the gun before loading magazine.
 
     

Home | Shipping Policy | Contact & FAQ | Security & Privacy | Manufacturer's Information
AtlantisArms.com © 2004