AtlantisArms.com - Glock Factory Stock Parts

A&G - Mag Spacer - Glock 17/22 to 26/27 - Grip Extender

Price $11.50

Item #

100005

Spec

A&G Grip Extenders are collars made of high-impact polymer which slip over full-size magazines, whether they are single stack 10 round or double stacked high capacity. These mini-guns (Glock 26/27, Glock 29/30, Para-Ordnance P10, Colt Officer’s Model and other small frame 1911 design 45’s) already accept the larger magazines. (In the case of the Glock 19/23 or 17/22 mags, the sleeves only fit on the full metal lined magazines). The A&G Extender is held in place with a set screw.

A large segment of mini-gun owners are law enforcement. If concealability is essential, the gun can be carried with a standard magazine, keeping a full size magazine with an A&G Grip Extender as a backup.

The Grip Extender can be put on and taken off the magazine very easily, converting your large magazine back to your duty weapon in under a minute.

A&G Grip Extenders help center the magazine in the frame of the gun. This helps to eliminate pinching and increases comfort and accuracy.

The A&G Grip Extender fills the gap between the bottom of the gun and the base of your full size magazine, giving the shooter the grip and feel of its larger counterpart.

A&G Grip Extenders come packaged individually with an Allen key and instruction sheet included.

Installation Instructions


		Safety First!!

	Make sure gun and magazine are unloaded before proceeding with instructions below.


	Caution: When loading any magazine, be sure the safety is on. When ejecting a magazine, DO NOT rely on gravity, pull magazine clear of gun with thumb and forefinger of weak hand.


	1 - Place extender over magazine and, holding with one hand, push down with other hand.


	2 - Slide extender to bottom of magazine and snug up set screw with Allen wrench supplied.


	3 - Place unloaded magazine into empty gun and move Extender up so it fits closely against the gun. Do not over-tighten ( may damage magazine).


	4 - Check to see that magazine seats properly in the gun before loading magazine.